Super high torque/super high speed programmable digital mini servo with metal gears with twin ballraced output shaft. Ideal for cyclic of 500-600 class helicopters. An aluminium case with for perfect cooling even under high loads.
Input voltage range 6.0-7.4 VÂ (nominal).
Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock:Â The setting when the servo does not receive the signal – Keep at the last angular position / The motor is released.
Max. Duty:Â The duty cycle of the motor will be limited within this value.
Pulse Lower:Â The minimum angular range will be limited within this command value.
Neutral:Â The setting of the neutral position.
Pulse Upper:Â The maximum angular range will be limited within this command value.
Boost:Â The steps of the motor when starting-up. The larger the value is, the more powerful the step of the motor during the start-up.
| Servo dimensions | Mini |
| Servo type | Digital |
| Programmable | Yes |
| Torque at 6.0V [kg∙cm] | 6.8 |
| Torque at 7.4V [kg∙cm] | 8.5 |
| Torque at 8.2 V [kg∙cm] | 9.4 |
| Speed at 6.0V [s/60st.] | 0.09 |
| Speed at 7.4V [s/60st.] | 0.078 |
| Speed at 8.2 VÂ [s/60st.] | 0.07 |
| Control pulse width in neutral [µs] | 1520 |
| Frame Rate [Hz] | 333 |
| Deadband [ms] | 0.001 |
| Servo gears | Metal |
| Ball bearings | 2× |
| High-voltage | Yes |
| Power supply [V] | 6 – 8.4 |
| Length [mm] | 35.5 |
| Width [mm] | 15 |
| Height [mm] | 28.55 |
| Weight [g] | 38.55 |
| Intended for | Aeroplanes,Helicopters |
| Servo motor type | HV Coreless |
Reviews
There are no reviews yet.